A stack of red MegaClad trapezoidal PUF roofing panels, the foam core showing at the edges
MegaClad
Product catalogue · 2026PDF · A4

●  Insulated PUF sandwich panels

Roofing Panels

One panel does the job of a metal sheet, a layer of insulation and a ceiling. Made to length at our plant in Medchal, Telangana, in two profiles, four thicknesses and thirteen standard colours.

2Profiles: trapezoidal & tile
30–100 mmFour core thicknesses
13Standard colours
15+States delivered to
01MegaClad · Roofing panels

Three layers, bonded as one.

Two colour-coated steel sheets with rigid polyurethane foam (PUF) poured and cured between them. The result is a stiff, light panel that keeps heat out and goes up in a single fix.

Cut end of a brown roofing panel showing the steel top sheet, PUF foam core and bottom liner
  1. Top sheet, ribbed

    Colour-coated steel, rolled into ribs that carry load across the span and run rainwater off the roof.

  2. PUF core, 30 to 100 mm

    Closed-cell polyurethane foam. It fills the ribs completely, insulates, cuts rain noise and stiffens the panel.

  3. Bottom liner

    A flatter steel sheet that becomes a clean, finished ceiling from inside. No false ceiling needed.

TOP SHEET · COLOUR-COATED STEEL PUF CORE · 30 / 50 / 80 / 100 mm BOTTOM LINER
Trapezoidal profile, section not to scale. Core thickness is measured from liner to the base of the ribs.

Keeps the heat out

The foam core stops the sun-baked metal roof from radiating heat into the room below.

Light, yet strong

Steel skins and a bonded core make a stiff panel that needs a lighter structure.

Fast to install

Roof, insulation and ceiling go on in one fix. Our own teams install, with fasteners and sealants.

Weather-tight

Ribbed top sheet and overlapping joints shed monsoon rain and quieten the drumming.

02Profiles & variants

Two looks, four ways to build it.

Both profiles are the same insulated sandwich underneath. Pick the trapezoidal profile for industrial roofs, or the tile profile when the roof should look like a traditional clay-tile roof. Each comes in two variants.

A stack of green trapezoidal PUF roofing panels with the foam core showing at the cut endsProfile A

Trapezoidal roof panel

Deep, evenly spaced ribs for long spans and fast drainage. The workhorse for factories, warehouses, sheds and cold-store roofs. A2 adds tile steps to the same ribs for a tiled look.

Best for
Industrial & commercial roofs
Variants
A1 standard rib · A2 tile rib
Colours
All 13 standard shades
Maroon tile-profile PUF roofing panels stacked, the foam core showing at each edgeProfile B

Tile-profile roof panel

Pressed to look like rows of clay roof tiles, with all the insulation of a PUF panel. For homes, villas, resorts, farmhouses and terraces.

Best for
Residential & hospitality roofs
Variants
B1 roman wave · B2 stepped tile
Popular in
Terracotta, red, maroon

Choose your variant

All four come in 30, 50, 80 and 100 mm cores and are cut to the length of your roof.

Green trapezoidal panel with closely spaced ribsA1
Trapezoidal

Standard rib

Closely spaced deep ribs with light lines in the pans, in a gloss finish. The classic industrial roof.

Green tile-rib panel: trapezoidal ribs with a step pressed across every tile length, foam core at the cut endA2
Trapezoidal

Tile rib

The same trapezoidal ribs, with a step pressed across the panel every tile length. Looks like a tiled roof, drains like an industrial one.

Glossy terracotta tile panel with large rounded wavesB1
Tile profile

Roman wave

Large rounded waves, like half-round clay tiles. Bold and glossy.

Maroon tile panel with rows of smaller stepped tilesB2
Tile profile

Stepped tile

Rows of smaller stepped tiles for the look of a classic tiled roof.

03Core thickness

Pick the core for your climate.

A thicker core insulates more. Most roofs over people and stock sit at 50 mm; go thicker for hot top floors and temperature-controlled spaces.

A stack of grey PUF roofing panels, the cream foam core showing along every edge
Panels from a recent batch, stacked for dispatch: the cream PUF core runs the full length of every panel.

Not sure which core you need? Tell us the building and what goes under the roof, and we will recommend one with your quotation.

04Colours

Thirteen standard colours.

Every panel, in either profile, is available in each of these separate colours. Pick a shade from the card to see it on a panel. Other shades, like the maroon, brown and charcoal in our photos, can be made to order.

Reds & earthBrick Red
Shade 03 of 13
    The thirteen colour samples as real cut strips of profiled sheet, numbered 1 to 13

    The real thing

    Our shade card, in steel.

    These are the actual sample strips, numbered 1 to 13 in the same order as the card above. Screens and printers shift colours, so please confirm your shade against a physical sample before ordering.

    05Build it in 3D
    Open in 3D

    Spin it, open it up, put it on a roof.

    The 3D configurator builds any of the four variants in any core and colour. Pull the layers apart to see the foam, or see the panel on a small house by day and by night. When it looks right, send it to us on WhatsApp for a quote.

    Start from one of these

    Open the 3D configurator
    • The configurator's Layers view: top sheet, PUF core and liner pulled apart, with labels
      LayersPull the panel apart to see the sheet, core and liner.
    • The configurator's On a roof view: a small house roofed with terracotta tile-profile panels
      On a roofSee your profile and colour on a small house.
    • The same house at night, its windows lit, under a brick-red tile roof
      Day and nightSwitch the light to see the roof after dark.
    07Built with our panels

    Roofs and buildings we have finished.

    From farm-stay cottages to site offices and rooftop rooms, our panels form the roof, and often the walls too. Tap any project to see it larger.

    08Made, delivered, installed

    From our plant to your roof.

    We make, deliver and install. Our own teams fit the panels with matching fasteners and sealants, so one company answers for the whole roof.

    Sky blue roofing panels on the production floor at the MegaClad plant
    01 · MAKE

    Made to length

    Each panel is foamed and cut to your roof's length at our plant in Medchal, Telangana, so there are fewer joints on the roof.

    A truck loaded with stacks of PUF panels ready to leave
    02 · DELIVER

    Delivered across India

    Stacked, protected and trucked to site. We have supplied projects in more than 15 states.

    A finished red trapezoidal PUF panel roof
    03 · INSTALL

    Fitted by our team

    Our installation crews fix, seal and flash the roof, with fasteners and sealants supplied by us.

    • Made to lengthCut to your roof at our plant in Medchal, Telangana
    • 15+ statesProjects supplied across India
    • Our own crewsFixing, sealing and flashing, with our fasteners
    • 24–48 hoursTo plan a free technical review of your roof
    Download the PDF